Installation Instructions

1. Take a 1/2″ to 1″ off of each side and cut your opening.
2. Place the window over the opening.
3. Screw in hinges and swivels.
Ex: A 24×10 would need a rough opening of 23×9.
Note*: Wall thickness does not matter for these windows to operate properly.

1. Add 1/8” to the height and length of the size of window you purchased.
Ex: A 24×11 1/2 window would need a rough opening of 24 1/8×11 5/8 for a proper fit.
2. Cut the hole needed.
3. Run a weatherproof caulk or use weather-stripping around the inside flange.
4. Place the window through the opening and secure the outside wall using screws or bolts and nuts.
5. From inside the blind, raise the window up and secure the metal magnet holder on the wall to line up with the magnet on the window.
Note*: Wall thickness cannot exceed 2” for this window to swing all the way up.

1. Add 1/8″ to height and length for a proper fit.
Ex: A 24” x 11 1/2″ window would require a rough opening of 24 1/8” x 11 5/8”.
2. Cut the proper-sized hole for the window purchased.
3. Install a weatherproof caulk around the inside flange and place it in the opening.
4. Secure the window with screws or nuts and bolts in the holes provided.
Note*: Wall thickness does not matter for these windows to operate properly.

1. Add a 1/8” to the inside frame dimensions of the door purchased.
2. Cut your desired hole.
3. Install a weatherproof caulk around the inside flange, place it in the opening, and install it with screws in the holes provided.